Print Service_DEW Additive Manufacturing

Print Service

Deyiwei focuses on 3D printing technology. With the application and small batch production, the company currently has 4 small and medium-sized equipment, 3 sintering and heat treatment equipment, and more than 20 sets of printing and post-processing equipment. Introduced 2 sets of medium-sized equipment, high-vacuum metal hot zone sintering furnace, professional post-processing equipment, etc.

Further improve capacity building and the introduction of R&D personnel. Currently, the industry is in the second round of accelerated growth driven by the wave of new technologies. In the future, the continuous expansion of industry application scenarios will continue to maintain rapid growth.

Deyiwei firmly believes in creating value for customers, takes products as the center, and strives to become a leader in the industry with the increasingly complete product system.

Prepare

Use the simulation software Live Sinter to simulate the sintered model and import it into the printing device.

Print

After the powder spreading system lays the powder, the printing nozzle will put the Binder Jetting on the powder bed according to the printing data, and repeat this action layer by layer until the entire cylinder part is printed.

Clear powder

The printing process is completed and solidified, and the excess powder is removed in the powder cleaning station, and the excess powder is recycled through the screening recovery system.

Sintering

The green body after powder removal is placed in a vacuum furnace for batch sintering, and the parts finally form a density of up to 99%.

1.Prepare

Use the simulation software Live Sinter to simulate the sintered model and import it into the printing device.

2.Print

3.Clear powder

The printing process is completed and solidified, and the excess powder is removed in the powder cleaning station, and the excess powder is recycled through the screening recovery system.

4.Sintering

The green body after powder removal is placed in a vacuum furnace for batch sintering, and the parts finally form a density of up to 99%.

Verified Material Type

Metal

Bronze, 304L, H13, 4340 Tantalum Alloy, Aluminum Alloy, H13, 17-4PH, HX, 420, 4140, Cobalt Chromium, Copper, Haynes230, Silver, Tungsten Alloy, Tc4, Rose Gold, Tungsten, 316L, Pure Titanium , M2 tool steel, H11, Inconel625, Inconel718

Ceramics

Glass, alumina, zirconia, zirconia carbide, graphite, silicon nitride, tungsten carbide, boron carbide, barium titanate, diamond, lead zirconate titanate/PZT, silicon carbide

Composite material